产品标题：B&R 8V1016.00-2配置说明伺服驱动器模块卡件

型号：B&R 8V1016.00-2

品牌： B&R

质保：七天验收期,质保期一年

交货期： 1-3个工作日

产品图片展示

产品详情资料：

8V1016.00-2是B&R代码ID为0xA6D6的ACOPOS 伺服驱动器。与其他ACOPOS 型号一样,它具有较短的采样时间和400 秒的通信周期。该伺服驱动器配有 CPU 模块,可集成驱动器控制器以实现基于驱动器的自动化。它还具有模块化机器架构,并且由于其线结构而需要较少的布线工作。ACOPOS 驱动型号重量为2.5kg,需要400V 至 480V的三相交流电源电压,容差为±10%。 它支持高达20kHz的开关脉冲频率。

8V1016.00-2 的直流总线电容为165µF。它还可以连接制动电阻器,可以方便地垂直或水平安装。它还提供防止电机过载的保护。该伺服驱动器使用 15m 电缆连接到电机,并且它具有无限数量的开关循环。它与支持编码器,传感器和执行器连接的插件模块兼容。其较大安装高度为海拔2000m,同时要求环境温度范围为5°C至40°C以实现***运营并保持其耐用性。在运输过程中,需要一个较大相对湿度为95%的空间

产品英文详情资料：

8V1016.00-2 is an ACOPOS servo driver with B&R code ID 0xA6D6. Like other ACOPOS models, it has a shorter sampling time and a communication cycle of 400 seconds. This servo driver is equipped with a CPU module that can integrate a driver controller for driver based automation. It also has a modular machine architecture and requires minimal wiring work due to its wiring structure. The ACOPOS driver model weighs 2.5kg and requires a three-phase AC power supply voltage of 400V to 480V with a tolerance of ± 10%. It supports switching pulse frequencies up to 20kHz.
The DC bus capacitance of 8V1016.00-2 is 165 µ F. It can also be connected to a braking resistor, which can be easily installed vertically or horizontally. It also provides protection against motor overload. The servo driver is connected to the motor using a 15m cable and has an infinite number of switching cycles. It is compatible with plug-in modules that support encoder, sensor, and actuator connections. Its maximum installation height is 2000m above sea level, and an ambient temperature range of 5 ° C to 40 ° C is required to achieve efficient operation and maintain its durability. During transportation, a space with a maximum relative humidity of 95% is required