MVME-2700处理器板卡自动化控制模块

注意：正常操作期间不应出现这种情况。位05仅用于诊断目的。Bit 04：保留-此位已保留。位03：重置节点请求–当此位为高（1）时，网络上的另一个节点已请求本地PCI总线主控器重置此板。RFM‐5565不会自动复位。Bit 02：待定网络。Int.3–当该位为高（1）时，已接收到一个或多个类型3网络中断。要查看发送方数据和发送方节点ID，请分别读取偏移$30的中断发送方数据3（ISD3）FIFO和偏移$34的中断发送方ID（SID3）FIFO

NOTE This condition should not occur during normal operation. Bit 05 is for diagnostic purposes only. Bit 04: Reserved　‐　This bit is reserved. Bit 03: Reset Node Request – When this bit is high (1), another node on the network has requested that the local PCI bus master reset this board. The RFM‐5565 does not reset itself automatically. Bit 02: Pending Net. Int. 3 – When this bit is high (1), one or more type 3 network interrupts have been received. To see the sender data and sender node ID(s), read the Interrupt Sender Data 3 (ISD3) FIFO at offset $30 and the Interrupt Sender ID (SID3) FIFO at offset $34 respectively

来源：厦门兴锐达自动化设备有限公司